
Krista Renz
- Total activity 56
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 43
Articles
Recent activity by Krista Renz Sort by recent activity-
Ultrix upgrade
Current release: 5.6.3 Preliminary Steps: 1. Capture a System Status salvo. Expand the Ultrix node and navigate to Database > Salvos. 2. Back up the database and frame settings. Navigate to Sy...
Ultrix Carbonite upgrade
Ultrix Carbonite Software Upgrade Guide Current release: 9.0 Preliminary Steps: Download the .ultx_carb upgrade file Save a switcher set onto USB (Help Page: To Store a Set) Upgrade through D...
Touchdrive module replacement
To replace the module you will need the following: Set of Module Extraction Tools located in the Desk Mounting Kit of your control panel. Torx® T10 screwdriver. To Remove a Module Power off the ...
Ultrix Acuity upgrade
UltrixAcuity Software Upgrade Guide Current release: 13.0c Preliminary Steps Save a backup of the switcher configuration 1. Navigate to Home > Disk2. On the right side, select Hard Drive and/or U...
NK Micro controller - losing routes on reboot
As the NK routers age, there is a possibility that on reboot it will lose all the routes. This is due to the failure of the capacitor on the micro controller card. Once a new one is received bel...
TouchDrive SSD replacement - Modular (4882)
The SSD is located under a crosspoint module on top of the panel. To complete this procedureyou must remove the module, locate and replace the SSD, and then replace the module. To Replace the SSD i...
Touchdrive OS recovery
TouchDrive Panel OS Upgrade/Recovery Steps USB Upgrade: Creating the bootable USB drive from Windows 10 Formatting a USB drive: 1. Insert the USB into a USB port on the Windows 10 PC.2. Search for...
Touchdrive SSD Replacement - Non-Modular (4880AR)
The SSD on the TD1 to TD3S is located under a cover on the bottom of the panel. To complete this procedure you must invert the control panel and remove a metal cover from the bottom. To replace t...
FR1/FR2 Battery replacement
If the Battery alarm displays a red indicator in the Alarms table of the Frame Configurationinterface, you will need to replace the battery installed inside the Cooling Fan Module of the chassis.Th...
FR5 Battery replacement
If the Battery alarm displays a red indicator in the Alarms table of the Frame Configurationinterface, you will need to replace the battery installed inside the Cooling Fan Module of the chassis.Th...