If you ever need to default the IP addresses to your Carbonite Panel or Frame for a new integration or setup, you can do so using the dip switches found on the back of your Frame and Panel.
After you flip the switch for the IP address change, you will need to reboot the unit for the change to take affect.
Note: Remember to flip back the dip switch after the switcher boots up or it will default the IP address again the next time it is rebooted.
- The Default IP address of the Frame is 192.168.0.123
- The Default IP address of the Panel is 192.168.0.129
The dip switch you will need to flip will depend on the frame you have. Please take a look at the links below to ensure you are flipping the correct switch. The Switch location can be found in the Quick Start Guide (Hardware) on the product documentation
Carbonite Ultra:
https://help.rossvideo.com/ultra/Topics/Diagnostics/Diagnostics/Frame-DIPs.html
https://www.rossvideo.com/support/product-documentation/carbonite-ultra-documentation/
Carbonite/Carbonite Black:
https://help.rossvideo.com/carbonite-02/Topics/Diagnostics/Diagnostics/Frame-DIPs.html
https://www.rossvideo.com/support/product-documentation/carbonite/
Carbonite Solo:
https://help.rossvideo.com/solo/Topics/Diagnostics/Diagnostics/Frame-DIPs.html
https://www.rossvideo.com/support/product-documentation/carbonite-black-solo/
Carbonite Panel:
https://help.rossvideo.com/carbonite-02/Topics/Setup/ePCH/CarboNET-DIP.html